Removing The Alignment Roller; Removing The Saddle Alignment Motor - Canon Finisher-AK1 Service Manual

4
Parts Replacing and Cleaning > Saddle Stitcher Assembly > Removing the Saddle Alignment Motor > Procedure

Removing the Alignment Roller

■ Preparation
1) Open the Front Cover
2) Pull out the Saddle Unit. (service position)(Refer to page 4-99)
3) Remove the Saddle Inner Cover (Lower).(Refer to page 4-89)
4) Remove the Press Unit.(Refer to page 4-102)
5) Remove the Alignment Roller Unit.(Refer to page 4-112)
■ Procedure
1) Remove the 4 Alignment Rollers [1].
• 4 Plastic Rings [2]
[2]
[2]
[1]
4 Parts Replacing and Cleaning > Saddle Stitcher Assembly > Removing the Saddle Alignment Motor > Procedure
[1]
[2]
[2]
F-4-285

Removing the Saddle Alignment Motor

■ Preparation
1) Open the Front Cover.
2) Pull out the Saddle Unit. (service position)(Refer to page 4-99)
3) Remove the Saddle Inner Cover (Lower).(Refer to page 4-89)
4) Remove the Press Unit.(Refer to page 4-102)
5) Remove the Alignment Roller Unit.(Refer to page 4-112)
■ Procedure
1) Remove the Saddle Alignment Motor [1].
• 2 Screws [2]
• 1 Wire Saddle [3]
• 1 Connector [4]
• 1 Belt [5]
[2] [1]
[5]
4-113
[2]
[4]
[3]
F-4-286
4-113