Canon Finisher-AK1 Service Manual page 179

5
Adjustment > Basic Adjustment > Side Registration/Skew Adjustment > Skew adjustment
■ Skew adjustment
If the skew adjustment value is within the range, start from step 7).
1) Push the 3 claws [1], and remove the 3 knobs [2].
[2]
CAUTION:
When the One-way Clutch [1] inside the knob is removed, be sure to install it in the
direction where the arrow marking of the One-way Clutch is visible.
5 Adjustment > Basic Adjustment > Side Registration/Skew Adjustment > Skew adjustment
[1]
F-5-16
F-5-17
1) Lift the upper cover [1] in the arrow direction to remove the inner cover (upper) [2].
• 4 screws [3]
[2]
[3]
2) Remove the Latch Base Cover [1].
• 3 Screws [2]
x3
5-8
[1]
F-5-18
F-5-19
5-8