Table of Contents
Advertisement
5
Adjustment > Auxiliary Adjustment > Adjusting Position for Saddle Alignment Width > Procedure
5) Adjust 2 push switches (SW383, 384) so that there will be no gap [D] between the saddle
guide plate [1] and the paper edge [2].
Adjustment method is as follows:
Pressing SW383 [3] moves the guide plate in A direction while pressing SW384 [2] moves
the guide plate in B direction.
• Adjustment range: +10 to -10 (correction amount per unit: 0.2mm)
SW382
SW381
SW383
SW384 SW385
(-)
(+)
ENTER
[3]
[4]
6) Press switch SW385 once to complete the adjustment mode.
5
Adjustment > Auxiliary Adjustment > Adjusting Position for Saddle Alignment Width > Procedure
[D]
[D]
[1]
A
B
[2]
F-5-224
5-95
5-95
Advertisement
Table of Contents
