Internal Inspection - GE Brivo OEC 715 Service Manual

Workstation Inspection
3.
Inspect each workstation component listed under the heading workstation inspection. Select one check
box for each item in the list.
WorkStation Inspection list:
Physical Location
Monitor and Arm
Keyboard
Mouse
Covers
Frame
Handles
Wheels
3.4.3.

Internal Inspection

Observe electrostatic discharge safety procedures.
Removing any covers exposes dangerous electrical voltages on several components.
WARNING
When possible, disconnect system from AC line before removing any covers. When it is
necessary to leave the power applied, use extreme care to avoid death or injury from
electrical shock.
1. Remove workstation cover. Inspect the internal labels (refer to chapter 1.2.11) and parts. Check if
there are loose parts.
2. Remove the C-Arm's covers. Check all cables and PCBs inside C-Arm. Look for loose PCBs and
connectors and reset.
No problem Loose or missing
found
Broken or
parts damaged parts
Installation
Chipped or
scratched paint
3-17