GE Brivo OEC 715 Service Manual page 354

Brivo OEC 715/785/865 Mobile C-Arm X-Ray Product Service Manual
Exception Error
ID Warning
0201504 Warning
0201505 Warning
0201506 Warning
0201507 Warning
6-20
Exception
Description (Displayed in User Interface)
(In system Log)
Open camera Image acquisition exception.
failed System can't take exposure.
The mainframe stopped.
Please restart the system. If
this issue persists, please call
for service.
Load driver Camera driver exception.
configuration System can't take exposure.
file failed The mainframe stopped.
Please restart the system. If
this issue persists, please call
for service.
Get driver Camera driver exception.
thread failed System can't take exposure.
The mainframe stopped.
Please restart the system. If
this issue persists, please call
for service.
Set capture Image acquisition exception.
thread priority System can't take exposure.
failed The mainframe stopped.
Please restart the system. If
this issue persists, please call
for service.
Message Diagnosis Reference
install software.
1. Check connections
between camera
and workstation.
2. Check ETH1 port on
workstation mainboard.
3. Replace the camera.
1. Check connections
between camera
and workstation.
2. Check ETH1 port on
workstation mainboard
End capture failed.
1. If Gige camera is not
working correctly, please
change camera.
2. If LED on ethnet interface
is not twinkle, please insert
the network cable into
ethnet interface again or
replace another network
cable.
3. If all above methods can't
fix the exception, please re-
install software.
End capture failed.
1. If Gige camera is not
working correctly, please
change camera.
2. If LED on ethnet interface
is not twinkle, please insert
the network cable into
ethnet interface again or
replace another network
cable.
3. If all above methods can't
fix the exception, please re-
install software.