Replacing the Display Assembly
1.
Disconnect the system from AC power.
2.
Remove the paper tray as described in
on page
3.
Remove the battery as described in
4.
Remove the keyboard bezel as described in
67.
5.
Remove the four screws (1) that hold the display assembly in place.
6.
Lift the display out of the assembly.
7.
Reassemble the display by reversing the steps for removal.
8.
Perform the applicable checkout procedures.
Refer to
Replacing the Internal Modem (Option)
1.
Disconnect the system from AC power.
2.
Remove the paper tray as described in
on page
3.
Remove the battery as described in
2028451-183E
64.
"Functional Checkout" on page
64.
MAC™ 1600
"Replacing the Paper Tray Assembly"
"Replacing the Battery" on page
"Replacing the Keyboard" on page
99.
"Replacing the Paper Tray Assembly"
"Replacing the Battery" on page
Maintenance
64.
64.
71