GE Brivo OEC 715 Service Manual page 364

Brivo OEC 715/785/865 Mobile C-Arm X-Ray Product Service Manual
Exception Error
ID Warning
0312511 Error
0312512 Error
0301501 Warning
0301502 Warning
0301503 Warning
0301504 Error
0301505 Error
0301506 Error
6-30
Exception
Description (Displayed in User Interface)
(In system Log)
exception
MiniImageDirec Workstation communication
tory module exception. Please restart the
unregister OSGI system. If this issue persists,
service please call for service.
exception
MiniImageDirec Workstation communication
tory module exception. Please restart the
unregister system. If this issue persists,
CORBA servant please call for service.
exception
Get image and Workstation communication
overlay from IE exception. Can't get image and
failed overlay from the left monitor.
Please restart the system. If
this issue persists, please call
for service.
Set annotation Workstation communication
to IE failed exception. Can't set annotation
data to the left monitor. Please
restart the system. If this issue
persists, please call for service.
Set crop to IE Workstation communication
failed exception. Can't set crop to the
left monitor. Please restart the
system. If this issue persists,
please call for service.
Annotation Workstation communication
module register exception. Please restart the
servant system. If this issue persists,
exception please call for service.
Annotation Workstation communication
module exception. Please restart the
subscribe sync system. If this issue persists,
event exception please call for service.
Annotation Workstation communication
module exception. Please restart the
unsubscribe system. If this issue persists,
sync event please call for service.
Message Diagnosis Reference
1. Restart the system.
2. If not work, re-install
Workstation software.
1. Restart the system.
2. If not work, re-install
Workstation software.
1. Restart the system.
2. If not work, re-install
Workstation software.
1. Restart the system.
2. If not work, re-install
Workstation software.
1. Restart the system.
2. If not work, re-install
Workstation software.
1. Restart the system.
2. If not work, re-install
Workstation software.