Table of Contents
Advertisement
Brivo OEC 715/785/865 Mobile C-Arm X-Ray Product Service Manual
7.
Remove the WiFi power switch baffle and install the WiFi adapter power switch in Workstation cabinet back
plate. Connect the power switch cable to power switch in any Brown/Blue sequence.
8.
Reconnect cables of system interface board. Pull back Workstation cabinet and fasten the secure screws.
9.
Get an extra laptop/computer and disconnect all wireless/wire connections in extra laptop/computer.
10. Connect Ethernet cable between WiFi adapter and extra laptop/computer.
11. Set extra laptop/computer's Ethernet port to Obtain an IP address automatically (DHCP mode).
12. Power on the system, and then power on the WiFi adapter.
13. Open Internet browser in extra laptop/computer and input http://www.mywifiext.net/welcome.htm.
14. On the setup page in the current browser select the preferred language and country/region for the system.
Follow below screen shots as reference.
3-66
Wireless power switch baffle
Advertisement
Table of Contents
Troubleshooting
