Brivo OEC 715/785/865 Mobile C-Arm X-Ray Product Service Manual
1. Lift up the side of the C-Arm carefully and keep
the balance of the C-Arm. Loose the 4 screws
and remove mainframe front wheel.
2. Replace the new wheel. Move the C-Arm and
verify that the C-Arm can move freely.
Mainframe Back Wheel Plate Kit (5075904)
The FRU part for the rear wheel mainly provides the 2 plates and cable pushers.
1. Lift up the side of the C-Arm carefully and
keep the balance of the C-Arm. Remove
the label cover on the wheel plate. Then
remove the protection cover by releasing
3 secure screws.
2. Remove the circlip in the shaft.
7-26