GE Brivo OEC 715 Service Manual page 374

Brivo OEC 715/785/865 Mobile C-Arm X-Ray Product Service Manual
Exception Error
ID Warning
0309508 Warning
0309509 Warning
0309510 Warning
0309511 Warning
0309512 Warning
0309513 Error
0309514 Error
0309515 Error
0309516 Error
0309517 Error
6-40
Exception
Description (Displayed in User Interface)
(In system Log)
Start setup Open Setup exception. Please
exception restart the system. If this issue
persists, please call for service.
Stop setup Close Setup exception. Please
exception restart the system. If this issue
persists, please call for service.
Read Connectivity configuration
configuration loading failure. Please restart
file failed the system. If this issue
persists, please call for service.
Init tab page Runtime exception. Please
controller failed restart the system. If this issue
persists, please call for service.
Read serial Workstation hardware version
number from access exception. Hardware
bios failed information can't be displayed.
Please restart the system. If
this issue persists, please call
for service.
Register CORBA Workstation communication
service failed exception. Please restart the
system. If this issue persists,
please call for service.
Unregister Workstation communication
CORBA service exception. Please restart the
failed system. If this issue persists,
please call for service.
CORBA sync Workstation communication
notify failed exception. Please restart the
system. If this issue persists,
please call for service.
Subscribe sync Workstation communication
event failed exception. Please restart the
system. If this issue persists,
please call for service.
Unsubscribe Workstation communication
sync event exception. Please restart the
failed system. If this issue persists,
please call for service.
Message Diagnosis Reference
system unknown error
system unknown error
check if configuration file
crashed
system unknown error
1. Restart the system.
2. If not work, re-install
Workstation software.
make sure if omniNames
service failed, any module
initialization failed
make sure if omniNames
service failed, check
omniOrb log file
make sure if omniNames
service failed,
CorbaEventChannel
initialization failed
make sure if omniNames
service failed,
CorbaEventChannel
initialization failed
make sure if omniNames
service failed,
CorbaEventChannel
initialization failed