GE Brivo OEC 715 Service Manual page 389

Exception Error
ID Warning
0405707 Warning
0405708 Error
0405709 Error
0407501 Error
0407502 Error
0407503 Warning
0407504 Error
0407505 Error
0407506 Error
0407507 Error
Exception
Description (Displayed in User Interface)
(In system Log)
SCU module Workstation communication
register servant exception. Please restart the
exception system. If this issue persists,
please call for service
SCU inits a Semaphore exception. Please
semaphore restart the system. If this issue
failed persists, please call for service.
SCU module Workstation communication
unregister exception. Please restart the
servant system. If this issue persists,
exception please call for service
MM module Workstation communication
resolve object exception. Please restart the
exception system. If this issue persists,
please call for service
MM module Workstation communication
Invoke corba exception. Please restart the
service system. If this issue persists,
exception please call for service
Cancel thread Cancel execution thread
failed exception. Please restart the
system. If this issue persists,
please call for service.
MM module Workstation communication
register servant exception. Please restart the
exception system. If this issue persists,
please call for service
Init semaphore Semaphore exception. Please
failed restart the system. If this issue
persists, please call for service.
Set locale failed System start failure. Set locale
failed. Please restart the
system. If this issue persists,
please call for service.
Allocate System run out of memory.
memory failed Please restart the system. If
this issue persists, please call
for service.
Message
Troubleshooting
Diagnosis Reference
make sure if omniNames
service failed, any module
crashed
system unknown error
Make sure if omniNames
service failed, any module
initialization failed.
Make sure if omniNames
service failed, check
omniOrb log file.
System error: can't cancel a
thread.
Make sure if omniNames
service failed, check
omniOrb log file.
Check if the semaphore is
valid, or check if the
maximum allowable value
for the semaphore will be
exceeded.
System error. Call to
setlocal() function failed.
Check memory using state.
6-55