Ac Power Supply Leds In Ex3200 And Ex4200 Switches; Dc Power Supply Leds In Ex3200 And Ex4200 Switches; Table 13: Ac Power Supply Leds In Ex3200 And Ex4200 Switches - Juniper EX3200 Series Complete Hardware Manual

Complete Hardware Guide for EX3200 and EX4200 Ethernet Switches
Related Topics

AC Power Supply LEDs in EX3200 and EX4200 Switches

Table 13: AC Power Supply LEDs in EX3200 and EX4200 Switches

LED
AC OK
DC OK
Related Topics

DC Power Supply LEDs in EX3200 and EX4200 Switches

30
AC Power Cord Specifications for EX3200 and EX4200 Switches on page 102
AC Power Supply LEDs in EX3200 and EX4200 Switches on page 30
DC Power Supply LEDs in EX3200 and EX4200 Switches on page 30
Rear Panel of an EX3200 Switch on page 8
Rear Panel of an EX4200 Switch on page 11
Field-Replaceable Units in EX3200 and EX4200 Switches on page 18
Power Specifications for EX3200 and EX4200 Switches on page 101
Prevention of Electrostatic Discharge Damage on EX Series Switches on page 236
Connecting AC Power to an EX3200 or EX4200 Switch on page 147
Connecting DC Power to an EX3200 or EX4200 Switch on page 149
Connecting Earth Ground to an EX Series Switch on page 141
The AC power supply in an EX3200 or EX4200 switch is on the rear panel. Table 13 on
page 30 describes the LEDs on the AC power supplies in EX3200 and EX4200 switches.
NOTE: If the LED and the
AC OK
installed properly or the power supply fuse has failed. If the
OK LED is unlit, the AC power supply is not installed properly or the power supply has
an internal failure.
Power Supply in EX3200 and EX4200 Switches on page 27
Connecting AC Power to an EX3200 or EX4200 Switch on page 147
The DC power supply in an EX3200 or EX4200 switch is on the rear panel. Table 14 on
page 31 describes the LEDs on the DC power supplies in EX3200 and EX4200 switches.
State and Description
Off—Disconnected from power or power is not coming into
the power supply.
On—Power is coming into the power supply.
Off—Power supply is not sending out power correctly.
On—Power supply is sending out power correctly.
LED are unlit, either the AC power cord is not
DC OK
Copyright © 2010, Juniper Networks, Inc.
LED is lit and the
AC OK DC