Sfp+ Direct Attach Cables For Ex Series Switches - Juniper EX3200 Series Complete Hardware Manual

Table 21: Optical Interface Support for Gigabit Ethernet XFP Transceivers in EX3200 and EX4200
Switches (continued)
Ethernet Standard Specifications
10GBase-ZR Model Number
Rate
Connector Type
Fiber Count
Transmitter Wavelength
Minimum Launch Power
Maximum Launch Power
Minimum Receiver Sensitivity
Maximum Input Power
Fiber Type
Core/Cladding Size
Modal Bandwidth
Distance
DOM Support
Software required
Related Topics

SFP+ Direct Attach Cables for EX Series Switches

Copyright © 2010, Juniper Networks, Inc.
Uplink Modules in EX3200 and EX4200 Switches on page 34
Installing a Transceiver in an EX Series Switch on page 137
Removing a Transceiver from an EX Series Switch on page 179
Small form-factor pluggable plus transceiver (SFP+) direct attach copper cables, also
known as Twinax cables, are suitable for in-rack connections between servers and
switches. They are suitable for short distances up to 7 m, making them ideal for highly
cost-effective networking connectivity within a rack and between adjacent racks.
EX-XFP-10GE-ZR
10 Gbps
LC
Dual
1550 nm
0
4 dBm
–30 dBm
–7 dBm
SMF
9/125 µm
–
80 km (49.7 miles)
Available
Junos OS for EX Series switches, Release 9.0 or later
Chapter 3: Component Specifications
69