Standards Supported By These Cables; Table 23: Uplink Modules Connector Pinout Information For Ex3200 And Ex4200 - Juniper EX3200 Series Complete Hardware Manual

Standards Supported by These Cables

Related Topics
Uplink Modules Connector Pinout Information for EX3200 and EX4200 Switches
Table 23: Uplink Modules Connector Pinout Information for EX3200 and EX4200 Switches
Pin Number
A1
A2
A3
A4
A5
A6
A7
A8
A9
Copyright © 2010, Juniper Networks, Inc.
The cables comply with the following standards:
SFP mechanical standard SFF-843—see
Electrical interface standard SFF-8432—see
SFP+ Multi-Source Alliance (MSA) standards
Optical Interface Support in EX3200 and EX4200 Switches on page 43
Optical Interface Support in EX4500 Switches
Optical Interface Support in EX8200 Switches
Installing a Transceiver in an EX Series Switch on page 137
Removing a Transceiver from an EX Series Switch on page 179
EX3200 and EX4200 switches have a field-replaceable unit (FRU) uplink module on the
front panel. Table 23 on page 73 provides the uplink modules connector pinout
information.
NOTE: You can use these ports to connect an access switch to a distribution switch.
You can also use optional uplink module ports to connect members of a Virtual Chassis
across multiple wiring closets.
Pin Name
GND
GND
GND
GND
GND
GND
GND
GND
GND
Chapter 3: Component Specifications
ftp://ftp.seagate.com/sff/SFF-8431.PDF
ftp://ftp.seagate.com/sff/SFF-8432.PDF
.
.
73