Xfp Uplink Module; Figure 26: Xfp Uplink Module - Juniper EX3200 Series Complete Hardware Manual

XFP Uplink Module

Related Topics
Copyright © 2010, Juniper Networks, Inc.
The SFP+ uplink module requires Junos OS for EX Series switches, Release 9.4 or later.
Figure 26 on page 37 shows the XFP uplink module, which provides two ports for 10-gigabit
XFP transceivers.

Figure 26: XFP Uplink Module

Port 0
XFP uplink modules are shipped with a dust cover preinstalled in one port.
The XFP uplink module requires Junos OS for EX Series switches, Release 9.0 or later.
Network Port LEDs in EX3200 and EX4200 Switches on page 21
Uplink Modules Connector Pinout Information for EX3200 and EX4200 Switches on
page 73
Optical Interface Support in EX3200 and EX4200 Switches on page 43
SFP+ Direct Attach Cables for EX Series Switches on page 69
Example: Configuring Aggregated Ethernet High-Speed Uplinks Between a Virtual
Chassis Access Switch and a Virtual Chassis Distribution Switch
Example: Configuring Aggregated Ethernet High-Speed Uplinks with LACP Between
a Virtual Chassis Access Switch and a Virtual Chassis Distribution Switch
Installing an Uplink Module in an EX3200 or EX4200 Switch on page 135
Troubleshooting Uplink Module Installation or Replacement on EX3200 and EX4200
Switches on page 194
Status LED Status LED
Port 1
Link/Activity Link/Activity
LED LED
Chapter 2: Component Descriptions
37