Installing Switch Components; Installing And Removing Ex3200 And Ex4200 Switch Hardware; Components - Juniper EX3200 Series Complete Hardware Manual

CHAPTER 10

Installing Switch Components

Installing and Removing EX3200 and EX4200 Switch Hardware Components
Copyright © 2010, Juniper Networks, Inc.

Installing and Removing EX3200 and EX4200 Switch Hardware

Components on page 131
Installing a Power Supply in an EX3200 or EX4200 Switch on page 132
Installing a Fan Tray in an EX3200 or EX4200 Switch on page 133
Installing an Uplink Module in an EX3200 or EX4200 Switch on page 135
Installing a Transceiver in an EX Series Switch on page 137
Connecting a Virtual Chassis Cable to an EX4200 Switch on page 139
The EX3200 and EX4200 switch chassis is a rigid sheet-metal structure that houses the
hardware components. The field-replaceable units (FRUs) in EX3200 and EX4200
switches are:
Power supply
Fan tray
Uplink module
SFP transceiver
SFP+ transceiver
XFP transceiver
The power supply, fan tray, uplink module, and transceivers are hot-removable and
hot-insertable: You can remove and replace them without powering off the switch or
disrupting switch functions.
To install a power supply in an EX3200 or EX4200 switch, follow instructions in "Installing
a Power Supply in an EX3200 or EX4200 Switch" on page 132. To remove a power supply
from an EX3200 or EX4200 switch, follow instructions in "Removing a Power Supply
from an EX3200 or EX4200 Switch" on page 174.
To install a fan tray in an EX3200 or EX4200 switch, follow instructions in "Installing a
Fan Tray in an EX3200 or EX4200 Switch" on page 133. To remove a fan tray from an
EX3200 or EX4200 switch, follow instructions in "Removing a Fan Tray from an EX3200
or EX4200 Switch" on page 176.
131