Mounting An Ex3200 Or Ex4200 Switch On Four Posts In A Rack Or Cabinet; Figure 39: Mounting The Switch On Two Posts In A Rack - Juniper EX3200 Series Complete Hardware Manual

Complete Hardware Guide for EX3200 and EX4200 Ethernet Switches
Related Topics

Mounting an EX3200 or EX4200 Switch on Four Posts in a Rack or Cabinet

124

Figure 39: Mounting the Switch on Two Posts in a Rack

Have a second person secure the switch to the rack by using the appropriate screws.
7.
Tighten the screws.
Ensure that the switch chassis is level by verifying that all screws on one side of the
8.
rack are aligned with the screws on the other side.
If the switch is an EX4200-24F model, we recommend that you insert dust covers
9.
in any unused SFP ports.
Connecting Earth Ground to an EX Series Switch on page 141
Connecting AC Power to an EX3200 or EX4200 Switch on page 147
Connecting DC Power to an EX3200 or EX4200 Switch on page 149
Connecting and Configuring an EX Series Switch (CLI Procedure) on page 165
Connecting and Configuring an EX Series Switch (J-Web Procedure) on page 167
Mounting an EX3200 or EX4200 Switch in a Recessed Position in a Rack or Cabinet
on page 128
Rack-Mounting and Cabinet-Mounting Warnings for EX Series Switches on page 221
You can mount an EX3200 or EX4200 switch on four posts of a 19-in. rack or cabinet by
using the separately orderable four-post rack-mount kit. (The remainder of this topic
uses "rack" to mean "rack or cabinet.")
You can mount the switch on two posts in either a two-post rack or a four-post rack by
using the mounting brackets provided with the switch. See "Mounting an EX3200 or
EX4200 Switch on Two Posts in a Rack or Cabinet" on page 122.
Mounting rack
Mounting bracket
Copyright © 2010, Juniper Networks, Inc.