Connecting An Ex Series Switch To A Management Console; Figure 60: Connecting An Ex Series Switch To A Network For Out-Of-Band; Figure 61: Ethernet Cable Connector - Juniper EX3200 Series Complete Hardware Manual

To Management port
Related Topics

Connecting an EX Series Switch to a Management Console

Copyright © 2010, Juniper Networks, Inc.

Figure 60: Connecting an EX Series Switch to a Network for Out-of-Band

Management
(on the switch)
Management
network
Connecting an EX Series Switch to a Management Console on page 153
Management Port Connector Pinout Information for an EX2200 Switch
Management Port Connector Pinout Information for an EX3200 or EX4200 Switch on
page 42
Management Port Connector Pinout Information for an EX4500 Switch
Management Port Connector Pinout Information for an EX8200 Switch
Cables Connecting the EX8200 Switch to Management Devices
You can configure and manage an EX Series switch using a dedicated console. Every EX
Series switch has a console port with an RJ-45 connector. Use the console port to connect
the EX Series switch to the management console or to a console server. The console
port accepts a cable with an RJ-45 connector.
Ensure that you have an Ethernet cable with an RJ-45 connector available. An RJ-45
cable and an RJ-45 to DB-9 serial port adapter are supplied with the switch.
Figure 61 on page 153 shows the RJ-45 connector of the Ethernet cable supplied with the
switch.

Figure 61: Ethernet Cable Connector

Chapter 11: Connecting the Switch
Management PC
Management PC
Management PC
153