Removing Switch Components; Components - Juniper EX3200 Series Complete Hardware Manual

CHAPTER 13

Removing Switch Components

Installing and Removing EX3200 and EX4200 Switch Hardware Components
Copyright © 2010, Juniper Networks, Inc.
Installing and Removing EX3200 and EX4200 Switch Hardware
Components on page 173
Removing a Power Supply from an EX3200 or EX4200 Switch on page 174
Removing a Fan Tray from an EX3200 or EX4200 Switch on page 176
Removing an Uplink Module from an EX3200 or EX4200 Switch on page 177
Removing a Transceiver from an EX Series Switch on page 179
Disconnecting a Fiber-Optic Cable from an EX Series Switch on page 181
Disconnecting a Virtual Chassis Cable from an EX4200 Switch on page 182
Replacing a Member Switch of a Virtual Chassis Configuration (CLI
Procedure) on page 183
The EX3200 and EX4200 switch chassis is a rigid sheet-metal structure that houses the
hardware components. The field-replaceable units (FRUs) in EX3200 and EX4200
switches are:
Power supply
Fan tray
Uplink module
SFP transceiver
SFP+ transceiver
XFP transceiver
The power supply, fan tray, uplink module, and transceivers are hot-removable and
hot-insertable: You can remove and replace them without powering off the switch or
disrupting switch functions.
To install a power supply in an EX3200 or EX4200 switch, follow instructions in "Installing
a Power Supply in an EX3200 or EX4200 Switch" on page 132. To remove a power supply
from an EX3200 or EX4200 switch, follow instructions in "Removing a Power Supply
from an EX3200 or EX4200 Switch" on page 174.
173