Cabling Requirements - Oracle Sun SPARC T3-2 Installation Manual

Cabling Requirements

Prior to cabling and powering-on the server, gather the following network
information:
Netmask
■
IP address for the service processor
■
Gateway IP address
■
At a minimum, you must connect cables to these ports before powering-on the server
for the first time:
SP SER MGT port
■
SP NET MGT port
■
At least one system on-board Ethernet network port
■
Power cables to the power supply inlet ports
■
Related Information
"Connect the SER MGT Cable" on page 39
■
"Connect the NET MGT Cable" on page 40
■
"Connect the Ethernet Network Cables" on page 41
■
"Prepare the Power Cords" on page 46
■
"Power On the System for the First Time" on page 52
■
36 SPARC T3-2 Server Installation Guide • March 2012