Oracle Sun SPARC T3-2 Installation Manual page 66

Parameter
Subnet Netmask
IPv6?
Security Policy
Confirm
Name Service
NFSv4 Domain Name
Time Zone (Continent)
Time Zone (Country or Region)
Time Zone
Date and Time
root Password
Related Information
Oracle Solaris OS documentation
■
"Power On the System for the First Time" on page 52
■
56 SPARC T3-2 Server Installation Guide • March 2012
Description
If your answer to Subnet? was Yes, type the netmask for the subnet for your
network environment.
Specify whether or not to use IPv6. If you are not sure, select No to
configure the Ethernet interface for IPv4.
Select either standard UNIX security (no) or Kerberos Security (Yes). If you
are not sure, select No.
When prompted with this, review the onscreen information and change it if
needed. Otherwise, continue.
Select the name service according to your network environment.
Note – If you select a name service other than None, you will be prompted
for additional name service configuration information.
Select the type of domain name configuration according to your
environment. If you are not sure, select Use the NFSv4 domain
derived by the system.
Select your continent.
Select your country or region.
Select the time zone.
Accept the default date and time, or change the values.
Type the root password twice. This password is for the superuser account
for the Oracle Solaris OS on this server. This password is not the SP
password.