Table of Contents
Advertisement
No.
Cable Port or Expansion Slot
6
DB-15 video port
7
SP NET MGT Ethernet port
8
SP SER MGT port
Related Information
"Cabling Requirements" on page 36
■
"Secure Cables to CMA" on page 47
■
38
SPARC T3-2 Server Installation Guide • March 2012
Description
Use a DB-15 video cable to connect to a video device.
The network management port is the optional connection to
the ILOM SP. The service processor network management port
uses an RJ-45 cable for a 10/100BASE-T connection. If your
network does not use DHCP, this port will not be available
until you have configured network settings through the SP
SER MGT port.
Note - This port does not support connections to Gigabit
networks.
The serial management port uses an RJ-45 cable and is always
available. This port is the default connection to the ILOM
system controller.
Advertisement
Table of Contents
