Table of Contents
Advertisement
▼ Connect the Network Module Cables
The optional SPARC T3-2 Server 10 Gb Network Module card provides four 10 GbE
network connections when using a supported QSFP transceiver module.
1. Remove the transceiver module from its packaging and place it on an antistatic
mat.
2. Remove the protective end cap from the transceiver module.
3. Open the locking handle on the transceiver module until you feel the handle
click into position.
42
SPARC T3-2 Server Installation Guide • March 2012
Advertisement
Table of Contents
Need help?
Do you have a question about the Sun SPARC T3-2 and is the answer not in the manual?
Questions and answers