Input Power Information - Oracle Sun SPARC T3-2 Installation Manual

Related Information
"Input Power Information" on page 7
■
"Prepare the Power Cords" on page 46
■
"Powering On the Server for the First Time" on page 49
■

Input Power Information

The server provides redundant, hot-swappable power supplies. When each power
supply is connected to a separate power source, the server continues to operating
under the following fault conditions:
A power source failure that removes input power from one of the power supplies.
■
Failure of one of the power supplies.
■
Service actions which require removal of one of the power supplies.
■
Refer to the SPARC T3-2 Server Service Manual for power supply replacement
instructions.
Note – Input power cables: To avoid missing initialization messages, do not attach
power cables to the power supplies until you have finished connecting the data
cables and have connected the server to a serial terminal or a terminal emulator (PC
or workstation). The server goes into Standby mode and the Oracle ILOM service
processor initializes as soon as the input power cables are connected to the power
source.
Related Information
SPARC T3-2 Server Service Manual
■
"Electrical Specifications" on page 6
■
"Prepare the Power Cords" on page 46
■
Preparing for the Installation 7