Event Log (U6) - Panasonic EBL128 User Manual

Panasonic Eco Solutions Nordic AB
MEW01624 Rev: -
7.6

Event log (U6)

Presentation of the events in EBL128 is divided into three event lists,
Alarm, Interlocking and General respectively. The event lists can
also be read via EBLWin and the Web-server II.
Each list can have up to 500 events. The most recent event is shown
in the top of the list.
The initials of the person logged on to the system (e.g. JP) will also be
shown for each event when applicable (i.e. for commands).
Commands done via EBLWin and the Web-server will also be shown.
NOTE! The event logging is disabled as long as this menu (U6) is
open.

Log in with a User name and Password for typ Building officer (or
Service personnel), see page 5.
H1 Perform monthly test
Scroll (or press "4") to menu H4.
H4 Present system status

Press "A" to sub menu U1.
U1 Disablement

Scroll (or press "6") to menu U6.
U6 Event log

Press "A". Use the keypad to select event log:
0=Alarm (not control neutral).
1=Interlocking
2=General
Press "A".

This is a list in which you can scroll.

Press "Return" (P9) and select another event log or press "Return"
again to menu U6.

Scroll to another menu or press "Return" to menu H4. Scroll to
another menu or leave the menu system by pressing "Return".
EBL128 version 2.0.x, Daily user's manual
27