Front Turn Signal Lamps; Tail Lamps, Turn Signals, Stop Lamps And Reverse Lamps - HOLDEN MY18 TJ Trax Owner's Manual

190 Vehicle care

Front turn signal lamps

1. Open the bonnet. Bonnet 0 178
2. Remove the turn signal lamp
bulb by rotating anticlockwise.
3. Remove the bulb from the bulb
holder by pulling straight out.
4. Install a new bulb into the bulb
holder.
5. Reinstall the bulb holder into the
headlamp assembly by rotating
clockwise.
6. Check lamp operation.
Tail lamps, turn signals,
stop lamps and reverse
lamps
Type 1
1. Tail / stop lamp
2. Tail lamp
3. Rear turn signal lamp
4. Reverse lamp