Table of Contents
Advertisement
Starting the SSA Service Aids
To start the SSA service aids:
1. Start the using-system diagnostics (see the Diagnostic Information for Multiple Bus
Systems manual), and go to the Diagnostic Operating Instructions.
2. Follow the instructions to select Function Selection.
3. Select Task Selection from the Function Selection menu.
4. Select SSA Service Aids from the Tasks Selection list.
The SSA Service Aids menu is displayed:
Notes:
a. In some configurations of the using-system console:
b. For some versions of AIX and for stand-alone diagnostics, the format of the
376
User's Guide and Maintenance Information
Esc and 0 = Exit
Esc and 3 = Cancel
In such configurations, however, the displayed instructions for the function keys
remain the same as those shown in the screen above.
service aid displays might be slightly different from that shown in this chapter.
Functionally, however, the displays remain the same.
Advertisement
Table of Contents
