Ssaidentify Command; Purpose; Syntax; Description - IBM Advanced SerialRAID Adapters SA33-3285-02 User Manual

ssaidentify Command

Purpose

To set or clear Identify mode for a physical disk.

Syntax

Description

If the -y parameter is specified, the disk is set into Identify mode. While the disk is in
Identify mode, its amber Ready light flashes at approximately one-second intervals. The
-n flag switches off Identify mode.

Flags

-l PhysicalDiskName
-y
-n
364
User's Guide and Maintenance Information
Specifies the device to place into Identify mode.
Switches on Identify mode.
Switches off Identify mode.