Example 7: To Change An Attribute Of An Object; Example 8: To Exchange A Member Disk Drive Of An Existing Array - IBM Advanced SerialRAID Adapters SA33-3285-02 User Manual

Example 7: To Change an Attribute of an Object

This example shows how to change an attribute of an object; for example, to change
the new array so that it does not automatically call a hot spare disk drive if one of its
member disk drives goes into the Offline state.
Type the command:
where:
A list of user-changeable attributes are available from "Hot Spare Pool Creation and
Change Attribute" on page 249.

Example 8: To Exchange a Member Disk Drive of an Existing Array

This example shows how to exchange a member disk drive of an existing array with a
free pdisk; for example, to exchange pdisk0 with pdisk3.
Type the command:
where:
If you give a List command in summary format, a result similar to that shown here is
displayed:
242
User's Guide and Maintenance Information
specifies that this operation is a change operation.
specifies that the object hdisk5 is about to be changed.
specifies the new value for the spare attribute.
specifies that this operation is an exchange operation.
specifies that the array about to be changed.
specifies the name of the existing member disk.
specifies the name of the new member disk drive.