Table of Contents
Advertisement
-t [threshold]
-a
-f [fan] Displays the status of all the fans, or of only the specified fans. Valid values for
-d [drive_bay]
-p [PSU]
-o
-c
| |
-e
-I ID[-U]
-B mode
-B card=mode
-S
|
-S d[drive_bay ...]
|
|
356
User's Guide and Maintenance Information
Displays all the temperature thresholds, or only the specified temperature
thresholds. The valid values for the [threshold] parameter are:
lowarn
The low-temperature warning threshold.
locrit
The low-temperature critical threshold.
hiwarn
The high-temperature warning threshold.
hicrit
The high-temperature critical threshold.
Displays the ambient temperature of the enclosure.
the [fan] parameter are: 1, 2, 3, and so on.
Displays the status of all the disk drive bays (slots), or of only the specified
disk drive bays. Valid values for the [drive_bay] parameter are: 1, 2, 3, and so
on.
Displays the status of all the power supply assemblies, or of only the specified
power supply assemblies. Valid values for the [PSU] parameter are 1, 2, 3,
and so on.
Displays the status of the operator panel.
Displays the status of the controller card.
Displays trace information (for service use only)
Modifies the enclosure ID. The ID must be a four-character alphanumeric
string. The optional -U flag causes the object data manager (ODM) to be
updated to show the change.
Modifies all bypass cards to the given mode.
Modifies the specified bypass cards to be in the given modes. The valid values
for the mode parameter are:
v Automatic
v Bypass
v Inline
v Open
Valid values for the card parameter are 1, 4, 5, 8, 9, 12, 13, 16.
Resets the "exchanged" flag of the selected FRU.
Resets the flag for the selected disk drive bay (slot). Valid values for drive_bay
are 1, 2, 3, and so on.
Advertisement
Table of Contents
