Table of Contents
Advertisement
6. (from step 5)
Either one or more disk drives have failed, or an array that is not complete has
been connected to the SSA adapter.
v If one or more disk drives have been added to this system, and those disk drives
v If no disk drives have been added to this system, go to step 7 on page 457.
456
User's Guide and Maintenance Information
were previously members of an array on this system or on another system, do
the following:
a. Type
b. Select Delete an SSA RAID Array.
c. Select the array that is in the Offline state, and delete it. All data that is on
that RAID array is now lost.
d. You must now locate and repair any failed disk drives, and make those disk
drives available for the creation of a new array. Go to step 7 on page 457.
and press Enter.
Advertisement
Table of Contents
