Table of Contents
Advertisement
7. (from steps 3 in MAP 2010: START and from steps 5 and 4 in this MAP)
Does your subsystem contain RAID arrays?
If you are not sure whether your subsystem contains RAID arrays:
a. Type
b. Select List All Defined SSA RAID Arrays.
NO
Run the repair verification, or repair completion, procedures that are
defined by your using system.
YES
Go to the RAID Checkout at step 22 on page 467 of MAP 2324: SSA
RAID.
and press Enter.
Chapter 18. SSA Problem Determination Procedures
477
Advertisement
Table of Contents
