Table of Contents
Advertisement
Command Line Error Log Analysis
A command line utility has been provided that allows you to run SSA error log analysis
from a manually-entered command or from shell scripts. The utility is ssa_ela. It can
perform SSA error log analysis on:
v All SSA devices
v A selected hdisk
v A selected pdisk
v A selected adapter
v Any of the above items for a history period of up to seven days
See "ssa_ela Command" on page 353 for details of how to use the utility.
run_ssa_ela cron
During installation of the SSA device drivers, the following entry is added to the cron
table:
This cron entry instructs the run_ssa_ela shell script to run at 05:01 each day for all
SSA devices that are configured in the using system. The shell script analyzes the error
log. If it finds any problems, the script warns the user in the following ways. It sends:
v A message to /dev/console. This message is displayed on the system console.
v An OPMSG to the error log. This message indicates the source of the error.
v A mail message to ssa_adm.
Note: ssa_adm is an alias address that is set up in /etc/aliases. By default this
232
User's Guide and Maintenance Information
address is set to "root", but you can change it to any valid mail address for the
using system.
Advertisement
Table of Contents
