Table of Contents
Advertisement
5. The following information is displayed:
6. Select Disk to Remove.
7. Press the List key to display the disk drive to remove. If the disk drive that you are
replacing has been rejected by the array, that disk drive is listed as
BlankReservedZ.
8. Select the required disk drive, and press Enter.
9. Select Disk to Add.
10. Press the List key to display the disk drive to add. Disk drives that are free or hot
spare disk drives are listed.
11. Select the required disk drive, and press Enter.
12. Press Enter to perform the swap operation.
96
User's Guide and Maintenance Information
Advertisement
Table of Contents
