Example 9: To Make A New System Disk; Example 10: To Delete An Array - IBM Advanced SerialRAID Adapters SA33-3285-02 User Manual

Example 9: To Make a New System Disk

|
This example shows how use a single SSA disk to make a new system disk.
Type the command:
where:
|
|
The result, in summary format, is similar to that shown here:

Example 10: To Delete an Array

This example shows how to delete an array.
Type the command:
where:
|
specifies that this operation is a change operation.
specifies the RAID manager that is to be used.
specifies the pdisk that is to be changed to a system disk.
specifies the new use of the pdisk.
specifies that a system disk is to be attached to the new array.
specifies that this operation is a delete operation.
specifies the RAID manager that is to be used.
specifies the hdisk that is to be deleted
specifies the system disk must be detached.
Chapter 12. Using the SSA Command Line Interface for RAID Configurations
243