Table of Contents
Advertisement
4. The hot spare pool is displayed:
v To add disk drives to the pool:
1. Select Components to Add and press the List key. A list of valid hot spare pool
2. Select the member disk drives to add to the pool and press Enter.
3. If necessary, change the Hot Spares Minimum field.
4. Press Enter.
v To remove disk drives from the pool:
1. Select Components to Remove and press the List key. A list of disk drives that
2. Select the member disk drives that are to be removed from the pool and press
3. If necessary, change the Hot Spares Minimum field.
4. Press Enter. The member disk drives that have been removed from the pool are
Notes:
1. If all member disk drives are removed from the pool, the pool is automatically
deleted.
2. When all member adding and deleting tasks have been completed, if the pool status
is anything other than full, go to "Solving Hot Spare Pool Problems" on page 53.
88
User's Guide and Maintenance Information
candidates is displayed. This list contains RAID disk drives, hot spare disk drives,
and free disk drives that are in pool zero on the selected loop. The pop-up list is
in the same format as the list that is used when a hot spare pool is created.
are now in the pool is displayed.
Enter.
now moved to pool zero of the selected loop.
Advertisement
Table of Contents
