Table of Contents
Advertisement
Getting Access to the SSA RAID Arrays SMIT Menu
1. For fast-path access to the SSA RAID Array SMIT menus, type
2. The SSA RAID Arrays menu is displayed:
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
press Enter.
Otherwise:
a. Type
and press Enter. The System Management menu is displayed.
b. Select Devices. The Devices menu is displayed.
c. Select SSA RAID Arrays.
From the following list, find the option that you want, and go to the place that is
indicated.
v "Adding an SSA RAID Array" on page 60
v "Deleting an SSA RAID Array" on page 70
v "Creating a Hot Spare Disk Drive" on page 72
v "Changing or Showing the Status of a Hot Spare Pool" on page 74
v "Showing the Disks That Are Protected by Hot Spares" on page 77
v "Listing the Disks That Are in a Hot Spare Pool" on page 80
v "Adding a New Hot Spare Pool" on page 83
v "Adding Disks to, or Removing Disks from, a Hot Spare Pool" on page 86
Chapter 6. Using the RAID Array Configurator
and
59
Advertisement
Table of Contents
