Table of Contents
Advertisement
6. Refer to Figure 49.
Figure 49. Installing the Mounting Screw of the Fast-Write Cache Option Card
7. Install the mounting screw 1 , and tighten it fully. (The screw is supplied with the
8. Reinstall the adapter into the using system (see the Installation and Service Guide
|
|
|
|
|
|
1
Fast-Write Cache Option Card.)
for the using system).
Note: The battery on the Fast-Write Option Card is not fully charged. After the
adapter is connected to the power, initial battery charging completes in 5 to
60 minutes. During this time, the fast-write disks can be enabled and used,
but the fast-write function remains inactive. To determine whether the
fast-write cache is active or inactive, give the command:
Chapter 15. Removal and Replacement Procedures
335
Advertisement
Table of Contents
