Appendix C - Email Alarm Format - Quest Controls TELSEC MP1 User Manual

Appendix C – Email Alarm Format
®
The TELSEC MP1 will generate text-based emails for alarm conditions. The email notification will follow
a specific format which is outlined below.
Format:
Subject line:
MP1 <email type> (<severity>) - <user defined subject line>
Email body:
MP1 named <site name> generated <email type>
Description of <alarm name>
Timestamped at <day month year hh:mm:ss -UTC>
Severity of <severity>
Value of <current value>
Data point name of <data point name>
Where:
<email type> = ALARM or CLEAR
<severity> CRITICAL, MAJOR, MINOR OR WARNING
<user defined subject line> = Subject field entered when defining the Email dispatch.
<site name> = The site name entered under Site Parameters
<alarm name> = The name of the alarm strategy that generated the alarm
<data point current value> = The current value of the data point causing the alarm condition
<data point name> = The name of the data point causing the alarm condition.
Example:
Subject: MP1 ALARM (Critical) - TELSEC
MP1 named MP1_Site_101 generated ALARM
Description of Tower Lights are not on
Timestamped at 01 Mar 2019 13:30:04 -0700
Severity of Critical
Value of 0.07
Data point name of Light Level Sensor
Rev 3.0 9/15/22
®
MP1 Email notification
- 57 -
©
TELSEC MP1 User Guide