Exit & Logout Command; File Upload Format; Section Formats - Quest Controls TELSEC MP1 User Manual

Table of Contents

--- 192.168.1.1 ping statistics ---

4 packets transmitted, 4 packets received, 0% packet loss

round-trip min/avg/max = 0.758/3.265/10.726 ms

10.8 Exit & Logout Command

The exit and logout command have the same function. Typing exit or logout will terminate your session

and if changes were made, will cause the system to reboot and come back up with the new settings.

The MP1 supports complete programming by uploading a file through the web server. The file is broken

down into multiple segments and each starts with a heading in brackets. It is permissible to upload only

certain sections at a time, but when uploading a section, all the options for that section must be sent.

For example, if you send the [network] section, you must send all items in that section. For application

programs sections such as [alarms], you must send all alarm programs since the new uploaded alarm

section would replace all alarms that were in the unit. The alarms section [alarms] require that the

reference points (inputs, Modbus etc.) must be defined first. Therefore, they either have to be in the

same file during the upload or have previously been defined.

The configuration settings in each section are comma separated values. You can use a text editor or a

CSV application program to edit and or create the entire file or individual sections.

To become familiar with the file format, it is recommended that you download the file from the MP1 by

going to Settings/Advanced/Configuration Upload & Download and select "Download Configuration to

browser". A text file will be downloaded from the system to your web browser.

Listed below are the various sections in the configuration file along with explanation of what the section

is used for and how it correlates to programming through the web server.

11.1.1 [network]

Contains the network settings that are configured through the Settings/General section of the web

server for IPv4, IPv6 and IP General sections.

11.1.2 [site]

Site specific information from the Settings/General/Site Parameters section. In addition, there are fields

for latitude, longitude, and URL text information that are for future use and should not be changed.

11.1.3 [timeserver]

Information for setting the system clock which is configured through Settings/General/Time Settings.

11.1.4 [timezone]

The time zone used for the system which is configured through Settings/General/Time Settings.

Rev 3.0 9/15/22

- 46 -

TELSEC

MP1 User Guide

Table of Contents