Bypassing; Bypass Inputs - Quest Controls TELSEC MP1 User Manual

7 Bypassing

The Bypass page is used to bypass the two outputs on the MP1 and to override the current status of
directly wired input points.

7.1 Bypass Inputs

Directly wired inputs can have their current value overridden by clicking on the "Add new input bypass"
button. This will bring up the following dialogue:
Figure 19 - Bypass Inputs
Select the point to be bypassed in the Data ID field and then select the duration. The bypass value field
will have the option of ON or OFF for binary points or will allow the user to enter a value for analog
sensors. Press the Done button to complete the bypass. The point in bypass will then appear on the
bypass page. Clicking on the Auto button for the input will return the point to automatic readings.
Figure 20 - Input Bypass Status
©
Rev 3.0 9/15/22 - 18 - TELSEC MP1 User Guide