Quest Controls TELSEC MP1 User Manual page 11

3.4.2 Voltage Sensors
®
The TELSEC MP1 can read and scale any linear voltage input from 0 to 6 VDC. The MP1 has two 24 VDC
Output (maximum of 50 mA total) terminals for powering sensors. Use an external power supply for
sensors that have a higher current draw. Contact Quest for the Input Scaling spread sheet to determine
the correct number for the Low and High Custom scale factors.
RH TEMP
Figure 3 - Wiring Voltage Sensors
©
Rev 3.0 9/15/22 - 6 - TELSEC MP1 User Guide