Quest Controls TELSEC MP1 User Manual page 2

CRITICAL APPLICATIONS DISCLAIMER
QUEST PRODUCTS ARE NOT INTENDED OR AUTHORIZED FOR USE IN ANY APPLICATION THAT REQUIRES
FAIL-SAFE OPERATION, OR ANY SYSTEM THAT IS RESPONSIBLE FOR PROVIDING DETECTION,
MONITORING OR CONTROL OF CRITICAL SAFETY, LIFESAVING OR LIFE-SUPPORT CONDITIONS,
FUNCTIONS OR OPERATIONS (INCLUDING BUT NOT LIMITED TO FIRE DETECTION, ALARMING, OR
SUPPRESSION), OR ANY APPLICATION WHEREIN A FAILURE OR MALFUNCTION OF THE PRODUCT MAY
LEAD TO SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE, PERSONAL INJURY OR DEATH.
Lithium Battery Notice
Replace Battery with Panasonic CR2032 or equivalent Lithium Battery (Quest PN 250034), rated at 3
Vdc. Use of another battery may present a risk of fire or explosion.
CAUTION - Battery may explode if mistreated. Do not recharge, disassemble or dispose of in fire.
FCC Compliance Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate this equipment.
COPYRIGHT NOTICE
Copyright © 2022 by Quest Controls, Inc. (Quest). The material discussed in this publication is the
proprietary property of Quest. Quest retains all rights to reproduction and distribution of this
publication.
Specifications are subject to change without notice.
Rev 3.0 9/15/22