Quest Controls TELSEC MP1 User Manual page 29

Figure 28 - SNMP and Email Configuration
8.1.7 SNMPv3 User Configuration
Use this section to create up to four different users for SNMP Set/Get access to the system and sending
traps if v3 traps are configured under the Settings/Dispatch page. The MP1 supports authentication
using MD5 or SHA and Privacy using DES or AES. Usernames and passwords are 8-32 characters in
length and accept the characters a-z,A-Z and 0-9.
Figure 29 - SNMPv3 Username Configuration
©
Rev 3.0 9/15/22 - 24 - TELSEC MP1 User Guide