Alarm Programming - Quest Controls TELSEC MP1 User Manual

9.3 Alarm Programming

Select Alarms from the Program menu to see the alarm program screen. This screen will display all
programmed alarms in a table with the ability to navigate the table using the next, back, beginning and
end buttons. The filter section allows you to search based on the alarm name or the name of the point
used in the alarm. For example, to see all Tower alarms, you can type Tower in the name field and press
enter. Now only alarms with the word Tower in the name will be displayed.
The alarm names are hyperlinks that when selected will bring up the program alarm window. The same
window is used for new alarms when selecting the Add new alarm button.
Figure 46 - Program Alarm Page
©
Rev 3.0 9/15/22 - 36 - TELSEC MP1 User Guide