Appendix B - Radius Server Configuration - Quest Controls TELSEC MP1 User Manual

notifyPointOID 11476.100.1.10

Appendix B - RADIUS Server Configuration

For the RADIUS server configuration, you must use the "Filter-ID" attribute for each user to have access.
Inside the "Filter-ID" you must have QuestMP1:<number>
<number> is an encoded value for access to the different sections of the web server. The sections and
values are:
Home page – 1
Status – 2
Bypass – 4
Program – 8
Settings – 16
Add up the access level for the user and use that number. Example if you want a user to have full access
then the value to enter would be "QuestMP1:31".
Rev 3.0 9/15/22
Object The OID of the value of the point in alarm
Identifier
- 56 -
©
TELSEC MP1 User Guide