3.5 Wiring Outputs
There are two Form C relays available for control of external devices based upon alarm conditions or
time schedules. Place wires between the common and normally open or normally closed terminals for
each output on the MP1. The terminals support 16-24 AWG wire and are spring loaded. Press the white
button to release the spring-loaded tension and insert the wire. The relays are designed for Class 2
wiring and are rated for a maximum of 1 amp at 24 VAC or 30 VDC, 0.3 A @ 60 VDC.
Figure 6 - Wiring Outputs
©
Rev 3.0 9/15/22
- 9 -
TELSEC
MP1 User Guide