Configuring The Mp1; System Setup - Quest Controls TELSEC MP1 User Manual

8 Configuring the MP1

Configuring the MP1 consists of setting up the basic functions and features that will be used with your
application. Items such as the network settings, system clock, network protocols and alarm dispatch
need to be configured so the system knows what and how to operate when you program the system for
monitoring and alarming.

8.1 System Setup

Select Settings from the main menu and choose General. The MP1 will display a list of options for
configuration with the first one being Site Parameters. Click on each accordion header to modify the
settings for each section and press Save Settings to write the changes to non-volatile flash memory.
Save Settings will cause the system to save the changes and reboot to come up with the new values.
You can navigate through each section on this page, make changes and then press the Save button to
save all changes at once.
the "Save Settings" button.
8.1.1 Site Parameters
The Site name is displayed in the header of web pages and is used when sending Emails and/or SNMP
traps. Enter the desired name to reference the site where the MP1 is located. Note spaces are not
allowed and will be converted to underscores. The Site Information section is to store unique
information about the site such as the address to the facility or contact information.
Rev 3.0 9/15/22
Changes will not be saved if you navigate from this page without pressing
Press to save settings after
making changes in all sections.
Figure 22 - Web Server Setup
- 20 -
©
TELSEC MP1 User Guide