Quest Controls TELSEC MP1 User Manual page 43

Figure 48 - Selecting a point to alarm
9.3.1.4 Alarm Severity
Select the desired alarm severity from the Severity dropdown. A severity of NONE will disable the alarm
until the severity is changed to another level. Notice is special case severity level where the alarm when
active and cleared will appear in the alarm historical log, but alarms with Notice level are not sent as
traps or emails.
Figure 49 - Selecting the Alarm Severity
©
Rev 3.0 9/15/22 - 38 - TELSEC MP1 User Guide