Time Schedules - Quest Controls TELSEC MP1 User Manual

9.4 Time Schedules

Select Schedule from the Program menu to see the Program Schedule page. This page will show the
defined schedules (up to 8 schedules) and their current status or state. The name of the schedule is a
hyperlink that when selected will bring up a window showing the current settings and allow the user to
modify the schedule. The "Add new schedule" button will bring up the same change schedule dialogue
window. Press the "Save Settings" button once you have made changes to an existing schedule or
created a new schedule.
Figure 52 - Change/view Time Schedules
9.4.1 Change Time Schedule
The change schedule window has a place for the user to enter a thirty-two-character name to describe
the schedule and up to sixteen priorities for turning the schedule on and off. Select the action for a
priority line and then select the hours, minutes and AM/PM setting. Finally select which days of the
week the priority line will be active. Press the "Done" button once you are completed with filling out
the desired priorities. Schedules typically have at least one ON and OFF priority to allow the schedule to
change status based on time of day and the day of the week. Once the schedule is created, it will be
available for use in programming outputs and/or alarm strategies.
©
Rev 3.0 9/15/22 - 41 - TELSEC MP1 User Guide